All Products
Subtle, impact-resistant U-shaped profile. Add ambience to your interior with indirect LED lighting. Designed by Orio Tonini.
Dimension: L 2m x H 2cm x W 3cm
This segment - fits between P9010 uprights and the left/right arch segments (above)
Dimension: 12.5cm x 5cm x 5cm
A flat cornice extending accross the ceiling and providing a intriguing floating effect thanks to its recessed shadow line at the back. Check also the references C354 and C355. A timeless piece of art.
Dimension: 2m (length) x 3cm (max thickness) x 16.5cm (projection)
A small flat cornice extending accross the ceiling and providing a intriguing floating effect thanks to its recessed shadow line at the back. Small brother to C353 and C354. A timeless piece of art. With its modern and austere lines, this reference subtlety combines beauty and functionality.
Dimension: 2m (length) x 3.5cm (max thickness) x 11cm (projection)
Small flat cornice with shadow line at the back. Check also the C356. A timeless piece of art. With its modern and austere lines, this reference subtlety combines beauty and functionality. Horizontal and vertical lines smoothly merge into each other. It also feature an attractive shadow line.
Dimension: 2m (length) x 2cm (max thickness) x 6cm (projection)
Horizontal and vertical lines smoothly merge into each other. It also feature an attractive shadow line.These covings conceal LED indirect light and allow the creation of subtle lighting effects.
Dimention: 2m (L) x 5cm (H) x 5cm (P)
Inspired by the 1930's, the simple circular form allows the 'Curve' to be present without being intrusive. The LED lighting almost seems to disappear into its surrounds, giving a subtle effect. This profile will modernise any interior.
With its modern and austere lines, this reference subtlety combines beauty and functionality.
Dimention: 2m (L) x 5cm (H) x 5cm (P)
Beautiful up- or downlighter.
Shade can serve you in every respect – you can remodel it with or without LED lights, around doors, as a panel moulding or skirting. Its refined design and subtle shadow immediately create the impression of depth and light.
Dimention: 2m (L) x 18.5cm (H) x 5.8cm (P)
The Antonio concept, designed by top designer Ulf Moritz, consists out of 2 modernist profiles (C373 and C374). The installation of one or more of these profiles strengthens the existing architecture of your interior.
The products are made of a higher density Purotouch®, which makes them not only suitable for walls and ceilings but also as a skirting board.
Dimention: 2m (L) x 8cm (H) x 5cm (P)
The Antonio concept, designed by top designer Ulf Moritz, consists out of 2 modernist profiles (C373 and C374). The installation of one or more of these profiles strengthens the existing architecture of your interior.
The products are made of a higher density Purotouch®, which makes them not only suitable for walls and ceilings but also as a skirting board.
Dimention: 2m (L) x 18cm (H) x 5cm (P)
With this modern profile, you can perfectly integrate indirect LED lighting into your interior.
Want to take it to the next level? Combine it with the other L3 profiles (C381, C382, C383) and create a sophisticated linear pattern of light and shadow.
Dimention: 2m (L) x 5cm (H) x 5cm (P)
With this modern profile, you can perfectly integrate indirect LED lighting into your interior.
Want to take it to the next level? Combine it with the other L3 profiles (C380, C382, C383) and create a sophisticated linear pattern of light and shadow.
Dimention: 2m (L) x 95cm (H) x 5
With this modern profile, you can perfectly integrate indirect LED lighting into your interior.
Want to take it to the next level? Combine it with the other L3 profiles (C380, C381, C383) and create a sophisticated linear pattern of light and shadow.
Dimention: 2m (L) x 14cm (H) x 5cm (P)
With this modern profile, you can perfectly integrate indirect LED lighting into your interior.
Want to take it to the next level? Combine it with the other L3 profiles (C380, C381, C382) and create a sophisticated linear pattern of light and shadow.
Dimention: 2m (L) x 14cm (H) x 5cm (P)
A sleek profile within the Steps range. C390 is perfect as an original, modern cornice or as a practical solution for hiding a curtain rail or LED lighting. The chamfered corners at the top and bottom also create a subtle line of shadow that further accentuates the linear pattern.
Dimension: 2m (L) x 6cm (H) x 10cm (P)
A sleek profile within the Steps range. C392 is perfect as a modern cornice. Profile can also be 'reversed' to fit long-side across the ceiling.
Dimension: 2m (L) x 10cm (H) x 19cm (P)
A clean, modern profile from the Steps range. Here we fix the largest section to the ceiling, making the space seem wider. The angled corners above and below provide additional subtle shadow lines. Designed by Orio Tonin
Dimension: L 200 x H 9.5cm x W 3.1cm
A clean, modern profile from the Steps range. Here we fix the largest section to the ceiling, making the space seem wider. The angled corners above and below provide additional subtle shadow lines. Designed by Orio Tonini.
Dimension: L 200 x H 15.5cm x W 3.1cm
This clean, modern profile from the Steps range can also be used to conceal LED lighting. The angled corners above and below provide additional subtle shadow lines. Designed by Orio Tonini.
Dimension: L 200 x H 18.5cm x W 6.1cm
An art deco inspired cornice extending accross the ceiling
Dimension: 2m (L) x 100mm (H) x 60mm (P)
An art deco inspired cornice.
Dimension: 2m (L) x 53mm (H) x 50mm (P)
Rigid or Flexible
N403 + N410 A linear semi-circle frame for a wall niche. Maximal weight in a niche: When you screw the products at the wall, then you can put a weight of maximal 3 kg in the niche.
Dimensions: 43cm (W)x 71cm (H)
N404 + N410 Maximal weight in a niche: When you screw the products at the wall, then you can put a weight of maximal 3 kg in the niche.
Dimensions: 42cm (W) x 76cm (H)
N503 + N520 Maximal weight in a niche: When you screw the products at the wall, then you can put a weight of maximal 3 kg in the niche.
Dimensions: 69cm (W) x 113cm (H)
The intertwined spiral acanthus leaves and almonds of this ornament will bring a bucolic atmosphere indoors.
Dimension: 2m (L) x 50mm (H) x 25mm (Projection)
Rigid or Flexible
Flowers and double ribbons design for this dog-legged corner. Made to match references P21 and P20020 to create beautiful wall frames.
Dimension: 200mm (L) x 200mm (H) x 25mm (Projection)
Soft baroque curls and minimalistic design meet up to integrate past and future. Not avant-garde, not antique, simply unique.
Dimension: 2m (L) x 50mm (H) x 30mm (Projection)
Rigid or Flexible
Dentil style moulding which is a great match with our dentil cornice C211 and C422 and also covings CX107 and CX129
Dimension: 2m (L) x 65mm (H) x 30mm (Projection)
Rigid or Flexible
Nice compliment match with SX118, SX155 skirting board.
Dimension: 2m (L) x 80mm (H) x 25mm (Projection)
Rigid or Flexible
A nice Art deco style.
Dimension: 2m (L) x 75mm (H) x 20mm (Projection)
Rigid or Flexible
Matching corner for dado P8020.
Dimension: 200mm (L) x 85mm (H) x 25mm (Projection)
Soft baroque curls and minimalistic design meet up to integrate past and future. Nice compliment match with SX118, SX122 skirting board.
Dimension: 2m (L) x 60mm (H) x 25mm (Projection)
Rigid or Flexible
Soft baroque curls and minimalistic design meet up to integrate past and future. Nice match with C213, C217 and SX118 skirting board.
Dimension: 2m (L) x 40mm (H) x 15mm (Projection)
Rigid or Flexible
Matching corner dado for: P8030.
Dimension: 190mm (L) x 55mm (H) x 15mm (P)
Matching corner element for dado P8030.
Dimension: 130mm (L) x 130mm (H) x 15mm (P)
Compliments with the Byblos Arch Facia System.
Dimension: 2m (L) x 90mm (H) x 30mm (Projection)
Rigid or Flexible
The P9010 is the upright segment for the Byblos arch fascia system.
Dimension: 2m x 9cm x 3cm
Compliment match with SX105 skirting board.
Dimension: 2m (L) x 95mm (H) x 20mm (P)
Rigid or Flexible
The P9900 is a contemporary 8 x 1cm panel mould equally at home on the wall as a dado rail, or on the ceiling with the new C990 extra large coving. Using both the C990 and P9900 in combination creates a clean bold effect, which is accentuated by the shadow line within the panel mould.
Dimension: 2m (L) x 80mm (H) x 10mm (Projection)
K200 Pilaster shaft Narrow fluted pilaster. Pilasters provide a sense of style and stateliness to a room.
Dimension: Height: 2000mm; width 135mm; Max projection 20mm
K201 Pilaster capital Small Corinthian capital for pilasters, our most ornamental that has flourishes of acanthus leaves and volutes.
Dimension: Height 150mm; Max width 230mm; Max projection 60mm
K202 Pilaster plinth Narrow simple tuscan pedestal for pilaster.
Dimension: Height 540mm max width 185mm, Max projection 40mm
K250 Pilaster shaft Wide fluted pilaster shaft. Pilasters provide a sense of style and stateliness to a room.
Dimension: Height 2000mm; width 270mm, Max projection 25mm
K251 Pilaster capital Large Corinthian capital for pilasters, our most ornamental that has flourishes of acanthus leaves and volutes.
Dimension: Height: 355mm; width 430mm; Max projection 90mm
K254 Pilaster plinth Wide doric pedestal for pilasters.
Dimension: Height 530mm width 390mm, Max projection 70mm
A corner to finish PX103.
Dimension: 190mm(L) x 35mm (H ) x 13mm (Projection)
A corner to finish PX120.
Dimension: 190mm (L) x 57 mm (H) x 20mm (Projection)
This quarter-round is a rounded profile that can be used to finish off the bottom of a baseboard, especially when the floors are not even (to hide a gap).
Dimension: length 2m Height 2cm, projection 2cm
This small coving is a scooped profile that can be used to finish off the bottom of a baseboard, especially when the floors are not even (to hide a gap). This base cap is impact resistant and waterproof thanks to its high-density polymer blend.
Dimension: length 2m Height 2cm, projection 2cm
All our skirting boards are pre-primed and ready for painting and will hide wires behind the profile.
Dimension: length 2m Height 15cm, projection 1.6cm,
All our skirting boards are pre-primed and ready for painting and will hide wires behind the profile.
Dimension: length 2m Height 11cm, projection 1.3cm,
All our skirting boards are pre-primed and ready for painting and will hide wires behind the profile.
You can order the Rigid skirting Painted White with RAL9003 so you can save time.
Dimension: length 2m Height 14cm, projection 1.8cm,
All our skirting boards are pre-primed and ready for painting and will hide wires behind the profile.This product is shock- and waterproof thanks to its high-density polymer blend.
Dimension: length 2m Height 7cm, projection 1.5cm,
All our skirting boards are pre-primed and ready for painting and will hide wires behind the profile.This product is shock-and water proof thanks to its high-density polymer blend.
Dimension: length 2m Height 10cm, projection 1.5cm,
All our skirting boards are pre-primed and ready for painting and will hide wires behind the profile.This product is shock-and water proof thanks to its high-density polymer blend.
Dimension: length 2m Height 14cm, projection 1.5cm,
"This low skirting board creates like no other cosyness. It breaks the bare transition from wall to floor and dresses up a cold space in a warm atmosphere.
Dimension: length 2m Height 10.8cm, projection 2.5cm
This high skirting board creates like no other coziness. It breaks the bare transition from wall to floor and dresses up a big space in a warm atmosphere.
Dimension: length 2m Height 20.2cm, projection 1.6cm,
Our simplest skirting board is part of the SQUARE family. Use this multifunctional profile to fit your entire home with the same skirting board. All you need to do is select the correct size to fit your space.
Dimension: L 2m x H 6.6cm x W 1.3cm
This simple skirting board has a slight angle and fits any interior. This multifunctional moulding creates a seamless transition betweens walls and doors, windows and even ceilings.
Dimension: L 2m x H 6cm x W 1.2cm
Our simplest skirting board is part of the SQUARE family. Use this multifunctional profile to fit your entire home with the same skirting board. All you need to do is select the correct size to fit your space.
Dimension: L 2m x H 4 x W 1cm
NEW - Product finished with RAL9003 Signal white. It is not necessary to repaint this profile after installation. This large, simple skirting board is part of the SQUARE family. Use this multifunctional profile to fit your entire home with the same skirting board. All you need to do is select the correct size to fit your space.
Dimensions: Length 2m x Height 10.2cm x Projection 1.3 cm
Little brother of the SX118, one of our most popular and elegant skirting boards. Soft baroque curls and minimalistic design meet up to integrate past and future.
Dimension: length 2m Height 6.9cm, projection 1.1cm
This simple skirting board is the largest in the SQUARE family. Use this multifunctional profile to fit your entire home with the same skirting board. All you need to do is select the correct size to fit your space.
Dimension: L 2m x H 15.1cm x W 1.4cm
Ideal for renovation projects: a perfectly waterproof and paintable cover skirting.
Dimension: length 2m Height 10cm, projection 2.2cm
The elegant and timeless design of the SX172 makes it fit into any interior. Our skirting boards are impact and water resistant, already primed and easy to paint
Dimension: length 2m Height 8.5cm, projection 1.4cm
A smaller version of our bestseller SX118. The elegant and timeless design of this skirting profile makes it fit into any interior. Our skirting boards are impact and water-resistant, already primed and easy to paint.
Dimension: length 2m Height 10cm, projection 1.6cm
The pure design of this High Line plinth is fortified by the sharp corners and perfect proportions. The SX180 is ideal to accentuate the transition from floor to wall.
Dimension: 2m Long x 12cm High x 1.6cm Projection
The pure design of this High Line plinth is fortified by the sharp corners and perfect proportions – two fundamental elements of modernism.
Dimension: length 2m Height 20cm, projection 2.2cm
This multifunctional skirting board with rounded top provides endless possibilities. Use together with other members of the CASCADE family to effortlessly provide the entire space with a cohesive look.
Dimension: L 2m x H 7.5cm x W 1.3cm
This multifunctional skirting board with rounded top provides endless possibilities. Use together with other members of the CASCADE family to effortlessly provide the entire space with a cohesive look.
Dimension: L 2m x H 11cm x W 1.3cm
The new SX185 cover skirting from Orac Decor®, with elegant round top, has been manufactured to be fitted on top of an existing skirting board (max. 1.7 x 9.5 cm).
Dimension: length 12m Height 2cm, projection 2.5cm
This water-resistant and paintable cover skirting is ideal for renovations. Designed to be installed on top of existing skirting boards (1.4 x 9.9 cm max.). Old or damaged skirting boards that are difficult to remove are obstacles no more.
Dimension: length 2m Height 13.8cm, projection 2.2cm
The SX193 skirting board is part of the AUTOIRE family. This 25 cm high majestic footing will fit perfectly in a classic interior and will garantee a glamorous transition between floor and wall.
Dimention: length 2m Height 25cm projection 2.2cm
The GB02 is a strong curved brace bracket particularly suited to applications beneath Flat Top canopies, or as supports fixed to full height posts on colonial style verandahs.
Dimensions: 49cm high x 40cm projection x 7cm wide
Material: Pre-finished light weight Duropolymer®
The GB03 is the ideal choice as a support underneath the majority of apex canopies. Each bracket will support up to 75kg in weight, and can be used in GRP or traditional timber and tile canopy applications.
Dimensions: 63cm high x 58cm projection x 7cm wide
Material: Pre-finished light weight Duropolymer®
The GB04 is the ideally suited to larger apex canopies. Each will support up to 75kg in weight and can be used under GRP or traditionally built canopies.
Dimensions: 77cm high x 74.5cm projection x 5cm wide
Material: Pre-finished light weight Duropolymer®
This multifunctional skirting board with rounded top provides endless possibilities. Use together with other members of the CASCADE family to effortlessly provide the entire space with a cohesive look.
Dimension: L 2m x H 11cm x W 1.3cm
The geometric design Rombus is part of the 3D Wall Panels collection. It is the basic ingredient for endless creative applications and can be combined with Trapezium (ref. W101). Create sleek patterns or a playful interpretation using bright accent colours.
Dimension: 25.8 cm wide x 15 cm high x 2.9 cm thickness
The geometric design Trapezium is part of the 3D Wall Panels collection. It is the basic ingredient for endless creative applications and can be combined with Rombus (ref. W100). Create sleek patterns or a playful interpretation using bright accent colours.
Dimension: 34.5 cm wide x 15 cm high x 2.9 cm thickness
The geometric design Rombus is part of the 3D Wall Panels collection. It is the basic ingredient for endless creative applications and can be combined with Rombus W100 and Trapezium W101. Create sleek patterns or a playful interpretation using bright accent colours.
Dimension: 30 cm wide x 34 cm high x 3 cm thickness
Envelop is part of the 3D Wall Panels collection. Release your creativity and design a unique work of art that is a perfect fit for you and your interior. Play around with various shapes and use fun colour accents as a finishing touch
Dimension: 33 cm wide x 33 cm high x 2,9 cm thickness